Audi RS6 Sill panel trim, removing and installing. Sill panel trim, removing and installing (Audi RS6 only) 1 – Bolt 2 Nm (18 in. lb) 2 – Outer scuff plate After painting, attach -4- to sill panel trim with the tie-clips -13- 3 – Screw 2 Nm (18 in. lb) 10x 4 – Sill panel trim Remove: – Unclip outer scuff plate prior to removing sill panel trim Fig. 1 . – Remove screws -1-, -5-, -7- and -9- – Remove end piece -10- – Route sill panel trim to side. Fig. 1 Outer scuff plate, removing – Unclip outer scuff plate -1- in direction of -arrow- prior to removing sill panel trim – 3-. – For easier installation, moisten sill panel trim clip areas with soapy lubricant. – -2- gluing (adhesive) Fig. 2 Sill panel trim holder – Remove sill panel trim. – Unclip wheelhousing cover form holder. – Remove screws -3- from bracket -2- and remove clips -1- to remove holder. here to get Audi RS6 Sill panel trim, removing and installing